LCR Research LCR Pro1 Smart LCR Tweezers

LCR Research LCR Pro1 Smart LCR Tweezers

LCR Research LCR Pro1
Trust the Pro for Your LCR Measurements


LCR Pro1 integrates a pair of tweezers like probes and a LCR meter into a single compact, lightweight, battery powered device. It is an all-in-one portable device that provides a simple and efficient solution for not only measuring SMD components, but also making in-circuit debugging.





LCR Pro1 is an ideal device for many applications including components verification and sorting, production lines, laboratory and service center, in-field repair and more.

Key Features



- Easy operation – one hand use, full set of shortcuts
- Fully auto/manual selection
- High accuracy – R: 0.1%, L: 0.2%, C: 0.2%
- 5 test frequencies – 100Hz, 120Hz, 1kHz, 10kHz, 100kHz
- 3 test voltages – 0.2Vrms, 0.5Vrms, 1.0Vrms
- Multiple functions – R, L, C, Z, ESR, DCR, D, Q, θ, etc.
- Small size – 151 x 19 x 15mm
- Large OLED display – 0.96″, 128 x 64 resolution
- Ultra precise gold plated tips
- Rechargeable LiPO battery with USB charging
- PC remote control for data logging and programming
- Additional functions – sorting, recording, diode and continuity

Measurement range and Optimal Testing Frequency

Parameter Measurement Range Optimal Frequency
Resistance 25mOhm - 10MOhm 1kHz
Capacitance 0.2pF - 40nF 10kHz
  40nF - 40uF 1kHz
  40uF - 1mF 100Hz
Inductance 10nH - 1uH 100kHz
  1uH - 1mH 10kHz
  1mH - 100mH 1kHz
  100mH - 1H 100Hz


A Breakthrough in Accuracy



LCR Pro1 delivers high accuracy once found only in high-end desktop LCR meters. It provides basic accuracy 0.1% for resistance and 0.2% for capacitance and inductance with 5-digit resolution. Each device is fully calibrated during production and shipped with NIST (National Institute of Standards and Technology) traceable calibration certificate.

The test frequencies can be selected from 100Hz to 100kHz. 100kHz is ideal for measuring small inductance under 1uH. The test voltage can be selected from 0.2Vrms to 1.0Vrms. 1.0Vrms allows precision measurements of ceramic capacitors with high dielectric constant (K), such as  X5R type. 0.2Vrms is specially designed for in-circuit debugging because it is low enough to prevent the silicon chips from being active during measurement.

Ultra-Precise Tips



The redesigned gold-plated tips are more precise than ever. You can use them to pick up and measure SMD components quickly and reliably, even for parts down to sizes of 01005. Thanks to the precise tips, you can easily reach the component under test without touching the adjacent components during in-circuit troubleshooting even in a very crowded area.

High Definition User Interface



LCR Pro1 comes with a 0.96″ OLED display, doubling the size of its predecessor’s 0.91″ display. The pixels are doubled as well from 128*32 to 128*64. Larger font and more information can be displayed for you to read the results and navigate the menu more conveniently.

LCR Pro1 is full of handy shortcuts to help you switch all kinds of parameters faster and easier. During measurements, you can quickly select different settings by single clicking, double clicking or holding the navigation button.

PC Communication



LCR Pro1 is able to make measurements and charge its battery simultaneously when it connects to a PC via the Link1, a USB dongle style communication module. Using the GUI Data Logger software, you can remote control the device from a PC for parameter setup, programming and data logging.

What’s in the Box



- LCR Pro1 Portable LCR Meter
- Storage Box
- Quick Start Guide
- NIST Certificate
- USB Cable
- LCR Link1 (Optional)

Compare LCR Meters
 

Model LCR Pro1 LCR Elite1
Accurancy 0,1% 0.5%
Test Frequency 100Hz - 100kHz 100Hz – 10kHz
Test Voltage 0.2Vrms, 0.5Vrms, 1.0Vrms 0.45Vrms
Resistence (R) YES YES
Inductance (L) YES YES
Capacitence (C) YES YES
Impedance (Z) YES NO
Dissipator Factor (Q) YES NO
Quality Factor (Q) YES NO
Phase Angle (Ө) YES NO
Equivalent Series Resistance (ESR) YES YES
Direct Current Resistance (DCR) YES NO
Diode Check YES NO
Continuity YES NO
Sorting YES NO
Recording YES NO
Self Calibration YES NO
PC Connectivity YES NO
Dimensions (L x W x H) 151 x 19 x 15mm 151 x 19 x 14,5mm
Weight 30g 30g
Display OLED 0.96″, 128 x 64 Resolution OLED 0.91″, 128 x 32 Resolution
Battery 3.7V LiPO, Rechargeable 3.7V LiPO, Rechargeable
External Power Source DC 5V, micro-B USB Connector DC 5V, micro-B USB Connector
SMD Test Probe Ultra-Precise Gold Plated Precise Gold Plated

 

Model LCR Pro1 LCR Elite1
Accurancy 0,1% 0.5%
Test Frequency 100Hz - 100kHz 100Hz – 10kHz
Test Voltage 0.2Vrms, 0.5Vrms, 1.0Vrms 0.45Vrms
Resistence (R) YES YES
Inductance (L) YES YES
Capacitence (C) YES YES
Impedance (Z) YES NO
Dissipator Factor (Q) YES NO
Quality Factor (Q) YES NO
Phase Angle (Ө) YES NO
Equivalent Series Resistance (ESR) YES YES
Direct Current Resistance (DCR) YES NO
Diode Check YES NO
Continuity YES NO
Sorting YES NO
Recording YES NO
Self Calibration YES NO
PC Connectivity YES NO
Dimensions (L x W x H) 151 x 19 x 15mm 151 x 19 x 14,5mm
Weight 30g 30g
Display OLED 0.96″, 128 x 64 Resolution OLED 0.91″, 128 x 32 Resolution
Battery 3.7V LiPO, Rechargeable 3.7V LiPO, Rechargeable
External Power Source DC 5V, micro-B USB Connector DC 5V, micro-B USB Connector
SMD Test Probe Ultra-Precise Gold Plated Precise Gold Plated

 

Scrivi una recensione

Nota: Il codice HTML non viene tradotto!
    Male           Buono
Captcha

  • Visualizzazioni: 8148
  • Marca: LCR Research
  • Codice Prodotto: LCR Pro1
  • Disponibilità: Disponibile
  • Prezzo Netto:
  • 275,00€
  • Prezzo incl. 22% IVA: 335,50€
  • 3 o più 300,58€

Tag: lcrresearch

Testimonials

Ottimo servizio e pienamente soddisfatto dell'acquisto Nello Staff di BatterFly ho trovato professionalità e cortesia. Grazie

Lorenzo M sopra 17/02/2020

Estremamente professionali, gentili e velocissimi! Siglent SDS 1202E-X è un ottimo prodotto a un prezzo estremamente competitivo. Pienamente soddisfatto!

Ivan sopra 13/02/2020