HAKKO FX-889 Dual Port Station con 1 Stilo Saldante
HAKKO FX-889 can make a wide variety of handpiece combinations.
A newly born HAKKO FX-889 has 2 ports to support a variety of handpieces such as soldering irons of different power profile, gun type iron, tools for SMD rework.
T18 TIPS SELECTION LIST
Great cost performance
• Excellent thermal conductivity (T18 TIPS SELECTION LIST)
T18 and T19 tip series are designed to have improved thermal conductivity from their previous models by reviewing both external and internal structures.
• Digital display
Digital display shows setting temperature at a glance.
• Password function
Settings can be locked using a password to prevent them from being changed unexpectedly.
• Preset mode
This feature is very convenient when you want to change the set temperature to suit a particular workpiece, component, or tip shape. Simply select the desired temperature from a selection of preset temperatures registered in advance. (Up to 5 preset temperatures can be registered.)
Preset mode can save your trouble and improve workability.
• Adjustment mode
Temperature adjustment* is an essential part of any strict quality control system. With adjustment mode, what used to be a troublesome procedure is now as simple as entering the measured tip temperature to FX-889.
* Adjust the tip temperature to match the set temperature in case that there is a difference between those temperatures due to tip shape, heater replacement, or other factors.
Photo Measuring the tip temperature with a tip thermometer HAKKO FG-100
The reduced foot print is smaller than 2 of FX-888D and its iron holder.
Efficient setup is available even on smaller workbench.
Independent switches cut the power for each iron when not in use.
Power-saving design minimizes standby electricity.
Four buttons were symmetrically placed at the both sides on the front panel. The two buttons on each side allow simple and intuitive operation.
A color band can be attached to the handle, and this makes it possible to see at a glance which side it is connected to.
(2 pieces of color band are included as the standard accessories.)
4.Rich functions of iron holder
Convenient pockets to stock soldering tips
Three different ways for tip cleaning with provided cleaning tools
Simple and easy cleaning of iron holder inside by removing holder base
- Station (FX-889)
- Handpiece (FX-8801)
- Iron holder (with cleaning sponge, cleaning wire, rubber plate)
- Color band (qty 2)
- European Power cord
- Instruction manual
|Temperature range||50 to 480ºC|
|Temperature stability||±1ºC at idle temperature (When set to 200 to 480ºC)|
|Output voltage||AC 26V|
|Power consumption||65W (26V)|
|Tip to ground resistance||<2Ω|
|Tip to ground potential||<2mV|
|Heating element||Ceramic heater|
|Standard tip||Shape-B (No.T18-B)|
|Total length||217mm (with B tip)|
|Weight||46g (with B tip)|
* Total length and weight (w/o cord)