👉 SCARICA LA TERZA EDIZIONE DEL CATALOGO EMI/EMC 👈

Cinergia EL+ vHF, Regenerative High Frequency AC Electronic Load

Cinergia EL+ vHF, Regenerative High Frequency AC Electronic Load

CINERGIA offers a unique Regenerative AC Electronic Load designed to work in a 360 to 900Hz frequency range, used mainly in aircraft generator’s test platforms. The use of this equipment has two main advantages. On the one hand, it allows significant energy and power savings, as morethan 90% of the energy is fed back into the grid. Being, in many occasions, the energy saving the most important point since energy requirements of the laboratory will be reduced to the losses of the motor-generator bank plus the losses of the electronic load. On the other hand, it allows better control and greatly simplifies testing. Common test procedures require the generator to be loaded with a fixed power factor (cos fi) while the generator speed (and therefore frequency) changes. This requires a continuous adaptation of the inductance value to maintain a constant cos fi throughout the frequency sweep. The use of real inductors requires the use of many inductors, which will be switched on or off to modify the inductance or the use of variable. With CINERGIA’s High-Frequency Electronic loads it is only necessary to set the desired current and delay (cos fi) and the dynamic PLL will automatically synchronise the current with the voltage keeping the power factor fixed.

CINERGIA has developed a line of regenerative Electronic Load products capable of working in a frequency range of 360 to 900Hz. It was designed to simulate the different loads that can be found in the aircraft. This family of products includes 3 models designed to provide all the necessary tools to perform tests in this field.

All products include the high-frequency feature, and in addition, are combined with other functionalities, in AC and DC.

CINERGIA’s EL+ vHF has two main advantages: it allows significant energy and power savings. And secondly, allows better control and greatly simplifies testing.

CINERGIA’s EL+ vHF/AC emulates the electrical behaviour of passive and active devices connected to the grid. In addition, its grid stage as an Active Rectifier produces clean sinusoidal currents with very low harmonic distortion, it will emulate the 50/60Hz loads in the aircraft.

CINERGIA’s EL+ vHF/DC can create a +270/0/-270V network, emulate a DC load profile or even emulate the back up battery. It also includes specific software that will allow the testing and characterisation of the batteries.

Scrivi una recensione

Nota: Il codice HTML non viene tradotto!
    Negativo           Positivo

Batter Fly s.r.l. è una azienda italiana costituita nel 2002 con partita IVA IT02235301203

Contatti principali: telefono +39 051 6468377 email [email protected]

L'indirizzo della nostra nostra sede è Via Collodi 7a , 40012 Calderara di Reno (BO) Italia

Tutte le spedizioni partono dall'indirizzo della nostra sede sopra indicato tramite corriere espresso se non diversamente specificato nella conferma d'ordine

Per i clienti residenti in Italia, sia privati che aziendali, applichiamo l'IVA del 22%

Se il cliente ha specifiche esenzioni IVA lo deve comunicare prima di emettere l'ordine di acquisto

Per i clienti privati residenti al di fuori dell'Italia ma all'interno della Unione Europea applichiamo l'IVA del paese di destinazione

Per i clienti aziendali residenti al di fuori dell'Italia ma all'interno della Unione Europea non applichiamo l'IVA. L'IVA potrà tuttavia essere applicata nel caso in cui il cliente inserisca un numero di partita IVA errato o non certificato dal sistema VIES

I clienti possono inviare ordini di acquisto sia tramite il sito che richiedendo una quotazione personalizzata utilizzando il modulo apposito o tramite i nostri contatti principali sopra indicati

Batter Fly è presente da anni all'interno del MePa il Mercato elettronico della pubblica amministrazione. Nel caso uno o più prodotti non dovesse essere presente, contattaci e caricheremo quanto necessario in tempi rapidi

La disponibilità dei prodotti è indicata nella pagina del prodotto di interesse in vari modi:
- Unità in magazzino: 1 o più | indica le effettive unità disponibili
- Unità in magazzino: 0, consegna std. 2 settimane | indica le settimane standard che il fornitore indica per l'approvvigionamento
- Unità disponibili in arrivo il 24/10/2022: 3 | indica che in tale data ci saranno unità libere in arrivo

I prodotti ordinati entro le ore 15 vengono spediti lo stesso giorno, gli ordini ricevuti dopo le ore 15 verranno spediti il giorno lavorativo successivo

Ad ogni spedizione è associato un numero di tracking che verrà comunicato tramite email al cliente dopo la presa in carico da parte dello spedizioniere

Per vedere i costi di spedizione vai qui https://www.batterfly.com/shop/consegna

Per vedere i metodi di pagamento vai qui https://www.batterfly.com/shop/pagamenti

Per ogni altra domanda contattaci tramite i nostri contatti principali

  • Visualizzazioni: 8835
  • Marca: CINERGIA
  • Codice Prodotto: EL+ vHF
  • MPN: EL+ vHF

Tag: cinergia-el-vhf

RIGOL MHO2000-BND è un pacchetto software all-in-one per gli oscilloscopi della serie RIGOL MHO2000,..
999,00€
KEYSIGHT P9374B-001 Software di attivazione dell'analizzatore di rete vettoriale (VNA) per P9374B..
8.219,00€
TekBox TBCDNE-M2-CAL2 sono degli adattatori OSL per misurazione/calibrazione dell'impedenza in modal..
356,00€
Il dispositivo Inspectis HD-140-U-EU è un'unità di registrazione autonoma ("Stand-alone") progettata..